@小鱼 重启小车后好了,谢谢
重要提示
鱼香小铺正式开业,最低499可入手一台能建图会导航的移动机器人,淘宝搜店:鱼香ROS 或点击链接查看。
提问前必看的发帖注意事项—— 提问前必看!不符合要求的问题拒绝回答!!
社区使用指南—如何添加标签修改密码
提问前必看的发帖注意事项—— 提问前必看!不符合要求的问题拒绝回答!!
社区使用指南—如何添加标签修改密码
961848173 发布的最新帖子
-
RE: [FishBotCamera]1.固件下载与配置
求帮助。
固件下载失败 USB3.0口 快充数据线(并更换了多条数据线进行尝试)2024-03-13 12:32:34 > 准备从https://fishros.org.cn/forum/assets/uploads/files/1710042506276-fishbot_camera_driver_v1.0.0.240310.bin下载固件到/dev/ttyUSB0对应芯片为esp32 2024-03-13 12:32:34 > 准备从网址下载固件... 2024-03-13 12:32:35 > 2024-03-13 12:32:35 > --2024-03-13 12:32:34-- https://fishros.org.cn/forum/assets/uploads/files/1710042506276-fishbot_camera_driver_v1.0.0.240310.bin 2024-03-13 12:32:35 > 正在解析主机 fishros.org.cn (fishros.org.cn)... 124.222.2.110 2024-03-13 12:32:35 > 正在连接 fishros.org.cn (fishros.org.cn)|124.222.2.110|:443... 已连接。 2024-03-13 12:32:35 > 已发出 HTTP 请求,正在等待回应... 200 OK 2024-03-13 12:32:35 > 长度: 1591216 (1.5M) [application/octet-stream] 2024-03-13 12:32:35 > 正在保存至: ‘esp32.bin’ 2024-03-13 12:32:35 > 2024-03-13 12:32:35 > 固件下载完成! 2024-03-13 12:32:35 > 开始烧录固件... 2024-03-13 12:32:35 > esptool.py v4.7.0 2024-03-13 12:32:35 > Serial port /dev/ttyUSB0 2024-03-13 12:32:43 > Connecting...................................... 2024-03-13 12:32:43 > 2024-03-13 12:32:43 > A fatal error occurred: Failed to connect to ESP32: No serial data received. 2024-03-13 12:32:43 > For troubleshooting steps visit: https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html 2024-03-13 12:32:43 > 2024-03-13 12:32:43 > 2024-03-13 12:32:43 > [错误]固件写入失败,请检查日志或重试。。。
-
RE: [FishBot教程] 2.配置助手介绍与下载
执行完Ubuntu22.04 CH340系列串口芯片无法识别终极问题解决方案后,运行docker时qt报错
xhost + && sudo docker run -it --rm --privileged -v /dev:/dev -v /tmp/.X11-unix:/tmp/.X11-unix -e DISPLAY=unix:0.0 fishros2/fishbot-tool:v1.0.0.20230522 python3 main.py access control disabled, clients can connect from any host qt.qpa.xcb: could not connect to display unix:0.0 qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found. This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem. Available platform plugins are: wayland-egl, minimalegl, vnc, eglfs, vkkhrdisplay, wayland, linuxfb, offscreen, xcb, minimal.
查阅以往回复,确定已退出conda环境
运行echo $DISPLAY 结果为:0