鱼香ROS社区
    • 版块
    • 最新
    • 未解决
    • 已解决
    • 群组
    • 注册
    • 登录
    紧急通知：禁止一切关于政治&VPN翻墙等话题，发现相关帖子会立马删除封号
     提问前必看的发帖注意事项： 社区问答规则(小鱼个人)更新 | 高质量帖子发布指南

    [FishBot教程] 9.0.6. 雷达驱动及建图测试

    已定时 已固定 已锁定 已移动
    FishBot二驱机器人
    fishbot 建图
    53
    205
    59.8k
    正在加载更多帖子
    • 从旧到新
    • 从新到旧
    • 最多赞同
    回复
    • 在新帖中回复
    登录后回复
    此主题已被删除。只有拥有主题管理权限的用户可以查看。
    • 小鱼小
      小鱼 技术大佬 @279401783
      最后由 编辑

      @279401783 大概要换系统，或者使用后面的源码方式使用

      新书配套视频：https://www.bilibili.com/video/BV1GW42197Ck/

      1 条回复 最后回复 回复 引用 0
      • 小鱼小 小鱼 在 中 引用了 这个主题
      • 3
        3120044269 @小鱼
        最后由 编辑

        此回复已被删除！
        1 条回复 最后回复 回复 引用 0
        • 3
          3120044269
          最后由 编辑

          请问这个是什么问题呀，出现下面这个错误，已知ping可以正常运行，雷达是转的，跳线帽也是对的，ip地址配置正确，处于RUN MODE模式

          [ydlidar_node-2] [2024-12-22 15:13:32][error] Check Sum 0x4B26 != 0x74C6
          [ydlidar_node-2] [2024-12-22 15:13:32][info] Scan Frequency: 5.00Hz
          [ydlidar_node-2] [2024-12-22 15:13:32][info] Fixed Size: 720
          [ydlidar_node-2] [2024-12-22 15:13:32][info] Sample Rate: 3.00K
          [ydlidar_node-2] [2024-12-22 15:13:32][info] Scan Frequency: 5.00Hz
          [ydlidar_node-2] [2024-12-22 15:13:32][info] Fixed Size: 720
          [ydlidar_node-2] [2024-12-22 15:13:32][info] Sample Rate: 3.00K
          [ydlidar_node-2] [2024-12-22 15:13:32][info] Single Fixed Size: 310
          [ydlidar_node-2] [2024-12-22 15:13:32][info] Sample Rate: 3.00K
          [ydlidar_node-2] [2024-12-22 15:13:32][info] Successed to check the lidar, Elapsed time 386 ms
          [ydlidar_node-2] [2024-12-22 15:13:32][info] Now lidar is scanning...
          [ydlidar_node-2] [2024-12-22 15:13:33][error] Check Sum 0x6C52 != 0x4370
          [ydlidar_node-2] [2024-12-22 15:13:34][error] Check Sum 0x7CF6 != 0x5C74
          [ydlidar_node-2] [YDLIDAR ERROR]: -1 No error
          [ydlidar_node-2] [ERROR] [1734880416.377512451] [ydlidar_node]: Failed to get scan
          [ydlidar_node-2] [2024-12-22 15:13:36][error] Timeout count: 1
          [ydlidar_node-2] [YDLIDAR ERROR]: -1 Operation timed out
          [ydlidar_node-2] [ERROR] [1734880417.378154871] [ydlidar_node]: Failed to get scan
          [ydlidar_node-2] [2024-12-22 15:13:37][error] Timeout count: 2
          [ydlidar_node-2] [YDLIDAR ERROR]: -1 Operation timed out
          [ydlidar_node-2] [ERROR] [1734880418.379028243] [ydlidar_node]: Failed to get scan
          [ydlidar_node-2] [2024-12-22 15:13:38][error] Timeout count: 3
          [ydlidar_node-2] [YDLIDAR ERROR]: -1 Operation timed out
          [ydlidar_node-2] [ERROR] [1734880419.379892913] [ydlidar_node]: Failed to get scan

          小鱼小 1 条回复 最后回复 回复 引用 0
          • 小鱼小
            小鱼 技术大佬 @3120044269
            最后由 编辑

            @3120044269 把前面部分也截取一下

            新书配套视频：https://www.bilibili.com/video/BV1GW42197Ck/

            3 1 条回复 最后回复 回复 引用 0
            • 3
              3120044269 @小鱼
              最后由 编辑

              @小鱼 [INFO] [launch]: All log files can be found below /root/.ros/log/2024-12-22-15-43-42-718761-ea6d2dcc0496-58
              [INFO] [launch]: Default logging verbosity is set to INFO
              [INFO] [tcp_server-1]: process started with pid [59]
              [tcp_server-1] [INFO] [1734882223.432319749] [tcp_socket_server_node]: TCP端口:8888，已映射到串口设备:/tmp/tty_laser
              [tcp_server-1] [INFO] [1734882223.432845278] [tcp_socket_server_node]: 等待接受连接..
              [INFO] [ydlidar_node-2]: process started with pid [82]
              [ydlidar_node-2] [INFO] [1734882226.288480684] [ydlidar_node]: [YDLIDAR INFO] Current ROS Driver Version: 1.0.1
              [ydlidar_node-2]
              [ydlidar_node-2] [2024-12-22 15:43:46][info] SDK initializing
              [ydlidar_node-2] [2024-12-22 15:43:46][info] SDK has been initialized
              [ydlidar_node-2] [2024-12-22 15:43:46][info] SDK Version: 1.2.9
              [ydlidar_node-2] [2024-12-22 15:43:46][info] Connect elapsed time 0 ms
              [ydlidar_node-2] [2024-12-22 15:43:46][info] Lidar successfully connected [/tmp/tty_laser:115200]
              [ydlidar_node-2] [2024-12-22 15:43:46][info] Lidar running correctly! The health status good
              [ydlidar_node-2] [2024-12-22 15:43:46][info] Current Lidar Model Code 12
              [ydlidar_node-2] [2024-12-22 15:43:46][info] Check status, Elapsed time 0 ms
              [ydlidar_node-2] [2024-12-22 15:43:46][info] Lidar init success, Elapsed time [1]ms
              [ydlidar_node-2] [2024-12-22 15:43:46][info] Start to getting intensity flag
              [ydlidar_node-2] [2024-12-22 15:43:49][info] [YDLIDAR] End to getting intensity flag
              [ydlidar_node-2] [2024-12-22 15:43:49][info] [YDLIDAR] Create thread 0xF7E00640
              [ydlidar_node-2] [2024-12-22 15:43:49][info] Successed to start scan mode, Elapsed time 3564 ms

              小鱼小 1 条回复 最后回复 回复 引用 0
              • 小鱼小
                小鱼 技术大佬 @3120044269
                最后由 编辑

                @3120044269 在 [FishBot教程] 6. 雷达驱动及建图测试 中说：

                tcp_server-1] [INFO] [1734882223.432319749] [tcp_socket_server_node]: TCP端口:8888，已映射到串口设备:/tmp/tty_laser
                [tcp_server-1] [INFO] [1734882223.432845278] [tcp_socket_server_node]: 等待接受连接..

                应该是没有连接成功，emm，方便加一下我微信吗

                新书配套视频：https://www.bilibili.com/video/BV1GW42197Ck/

                3 1 条回复 最后回复 回复 引用 0
                • 3
                  3120044269 @小鱼
                  最后由 编辑

                  @小鱼 好的，怎么加呀

                  小鱼小 1 条回复 最后回复 回复 引用 0
                  • 小鱼小
                    小鱼 技术大佬 @3120044269
                    最后由 编辑

                    @3120044269 公众号下方有二维码

                    新书配套视频：https://www.bilibili.com/video/BV1GW42197Ck/

                    3 1 条回复 最后回复 回复 引用 0
                    • 3
                      3120044269 @小鱼
                      最后由 编辑

                      @小鱼 加啦加啦，韓.

                      1 条回复 最后回复 回复 引用 0
                      • L
                        lvjiaming2007
                        最后由 编辑

                        orange pi how to do

                        WARNING: The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested
                        exec /startup.sh: exec format error

                        1 条回复 最后回复 回复 引用 0
                        • J
                          jerry_88965294
                          最后由 编辑

                          @小鱼 我在四驱版使用时，雷达驱动第2步，驱动雷达报错，这步报错也会导致第3步报错，请问怎么回事呢？
                          8bf4719a-daa5-4bdf-b0c5-43920bb8fab6-image.png

                          S 1 条回复 最后回复 回复 引用 0
                          • S
                            sunhao2202 年度VIP
                            最后由 编辑

                            雷达驱动问题：
                            [ydlidar_node-2] [2025-01-03 11:31:56][error] Check Sum 0x68D7 != 0x1569
                            [ydlidar_node-2] [2025-01-03 11:31:59][error] Check Sum 0x5DEA != 0x1B19
                            [ydlidar_node-2] [YDLIDAR ERROR]: -1 No error
                            [ydlidar_node-2] [ERROR] [1735903928.417755598] [ydlidar_node]: Failed to get scan
                            [ydlidar_node-2] [2025-01-03 11:32:08][error] Timeout count: 1
                            [ydlidar_node-2] [2025-01-03 11:32:08][error] Check Sum 0x121C != 0x0233
                            [ydlidar_node-2] [2025-01-03 11:32:34][error] Check Sum 0xB856 != 0x868F
                            [ydlidar_node-2] [2025-01-03 11:32:34][error] Check Sum 0xBF44 != 0xD5E3
                            [ydlidar_node-2] [2025-01-03 11:32:35][error] Check Sum 0x53E4 != 0x51BD
                            [ydlidar_node-2] [2025-01-03 11:32:36][error] Check Sum 0xD974 != 0x87D3
                            [ydlidar_node-2] [2025-01-03 11:32:50][error] Check Sum 0x1E40 != 0x0FDE
                            [ydlidar_node-2] [YDLIDAR ERROR]: -1 Operation timed out
                            [ydlidar_node-2] [ERROR] [1735903972.437430773] [ydlidar_node]: Failed to get scan
                            [ydlidar_node-2] [2025-01-03 11:32:52][error] Timeout count: 1
                            [ydlidar_node-2] [YDLIDAR ERROR]: -1 Operation timed out
                            [ydlidar_node-2] [ERROR] [1735903973.437858047] [ydlidar_node]: Failed to get scan
                            [ydlidar_node-2] [2025-01-03 11:32:53][error] Timeout count: 2
                            [ydlidar_node-2] [2025-01-03 11:32:53][error] Check Sum 0x1A71 != 0x15AB
                            ^C[WARNING] [launch]: user interrupted with ctrl-c (SIGINT)
                            [ydlidar_node-2] [INFO] [1735903974.800384796] [rclcpp]: signal_handler(signum=2)
                            [ERROR] [tcp_server-1]: process has died [pid 59, exit code -2, cmd '/workspace/install/ros_serail2wifi/lib/ros_serail2wifi/tcp_server --ros-args --params-file /tmp/launch_params_s0dvbmtk --params-file /tmp/launch_params_4auj8l85'].
                            [tcp_server-1] Traceback (most recent call last):
                            [tcp_server-1] File "/workspace/install/ros_serail2wifi/lib/ros_serail2wifi/tcp_server", line 33, in <module>
                            [tcp_server-1] sys.exit(load_entry_point('ros-serail2wifi==0.0.0', 'console_scripts', 'tcp_server')())
                            [tcp_server-1] File "/workspace/install/ros_serail2wifi/lib/python3.10/site-packages/ros_serail2wifi/tcpserver.py", line 76, in main
                            [tcp_server-1] node.run()
                            [tcp_server-1] File "/workspace/install/ros_serail2wifi/lib/python3.10/site-packages/ros_serail2wifi/tcpserver.py", line 49, in run

                            雷达建图问题：

                            [ydlidar_node-6] [2025-01-03 11:26:54][error] Timeout count: 2
                            [ydlidar_node-6] [2025-01-03 11:26:54][error] Timeout count: 3
                            [cartographer_node-3] [INFO] [1735903614.135216721] [cartographer logger]: I0103 11:26:54.000000 63 node.cpp:569] Shutdown the subscriber of [scan]
                            [cartographer_node-3] [INFO] [1735903614.135283530] [cartographer logger]: I0103 11:26:54.000000 63 map_builder_bridge.cpp:152] Finishing trajectory with ID '0'...
                            [cartographer_node-3] [WARN] [1735903614.135465851] [cartographer logger]: W0103 11:26:54.000000 63 node.cpp:773] Can't run final optimization if there are one or more active trajectories. Trying to finish trajectory with ID 0 now.
                            [cartographer_node-3] [INFO] [1735903614.135520310] [cartographer logger]: I0103 11:26:54.000000 63 node.cpp:551] Trajectory 0 already pending to finish.
                            [cartographer_node-3] [INFO] [1735903614.135590080] [cartographer logger]: I0103 11:26:54.000000 63 map_builder_bridge.cpp:161] Running final trajectory optimization...
                            [cartographer_node-3] [INFO] [1735903614.136761950] [cartographer logger]: I0103 11:26:54.000000 116 pose_graph_2d.cc:538] Remaining work items in queue: 2
                            [cartographer_node-3] [INFO] [1735903614.136858631] [cartographer logger]: I0103 11:26:54.000000 116 constraint_builder_2d.cc:290] 21 computations resulted in 0 additional constraints.
                            [cartographer_node-3] [INFO] [1735903614.137078579] [cartographer logger]: I0103 11:26:54.000000 116 constraint_builder_2d.cc:292] Score histogram:
                            [cartographer_node-3] Count: 4 Min: 0.664706 Max: 0.9 Mean: 0.749173
                            [cartographer_node-3] [0.664706, 0.688235) ##### Count: 1 (25%) Total: 1 (25%)
                            [cartographer_node-3] [0.688235, 0.711765) ##### Count: 1 (25%) Total: 2 (50%)
                            [cartographer_node-3] [0.711765, 0.735294) ##### Count: 1 (25%) Total: 3 (75%)
                            [cartographer_node-3] [0.735294, 0.758824) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.758824, 0.782353) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.782353, 0.805882) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.805882, 0.829412) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.829412, 0.852941) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.852941, 0.876471) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.876471, 0.900000] ##### Count: 1 (25%) Total: 4 (100%)
                            [cartographer_node-3] [INFO] [1735903614.159599813] [cartographer logger]: I0103 11:26:54.000000 116 pose_graph_2d.cc:538] Remaining work items in queue: 1
                            [cartographer_node-3] [INFO] [1735903614.159673485] [cartographer logger]: I0103 11:26:54.000000 116 constraint_builder_2d.cc:290] 0 computations resulted in 0 additional constraints.
                            [cartographer_node-3] [INFO] [1735903614.160093412] [cartographer logger]: I0103 11:26:54.000000 116 constraint_builder_2d.cc:292] Score histogram:
                            [cartographer_node-3] Count: 4 Min: 0.664706 Max: 0.9 Mean: 0.749173
                            [cartographer_node-3] [0.664706, 0.688235) ##### Count: 1 (25%) Total: 1 (25%)
                            [cartographer_node-3] [0.688235, 0.711765) ##### Count: 1 (25%) Total: 2 (50%)
                            [cartographer_node-3] [0.711765, 0.735294) ##### Count: 1 (25%) Total: 3 (75%)
                            [cartographer_node-3] [0.735294, 0.758824) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.758824, 0.782353) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.782353, 0.805882) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.805882, 0.829412) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.829412, 0.852941) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.852941, 0.876471) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.876471, 0.900000] ##### Count: 1 (25%) Total: 4 (100%)
                            [cartographer_node-3] [INFO] [1735903614.175929395] [cartographer logger]: I0103 11:26:54.000000 115 constraint_builder_2d.cc:290] 0 computations resulted in 0 additional constraints.
                            [cartographer_node-3] [INFO] [1735903614.176097541] [cartographer logger]: I0103 11:26:54.000000 115 constraint_builder_2d.cc:292] Score histogram:
                            [cartographer_node-3] Count: 4 Min: 0.664706 Max: 0.9 Mean: 0.749173
                            [cartographer_node-3] [0.664706, 0.688235) ##### Count: 1 (25%) Total: 1 (25%)
                            [cartographer_node-3] [0.688235, 0.711765) ##### Count: 1 (25%) Total: 2 (50%)
                            [cartographer_node-3] [0.711765, 0.735294) ##### Count: 1 (25%) Total: 3 (75%)
                            [cartographer_node-3] [0.735294, 0.758824) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.758824, 0.782353) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.782353, 0.805882) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.805882, 0.829412) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.829412, 0.852941) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.852941, 0.876471) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.876471, 0.900000] ##### Count: 1 (25%) Total: 4 (100%)
                            [cartographer_node-3] [INFO] [1735903614.194124283] [cartographer logger]: I0103 11:26:54.000000 114 constraint_builder_2d.cc:290] 0 computations resulted in 0 additional constraints.
                            [cartographer_node-3] [INFO] [1735903614.194258427] [cartographer logger]: I0103 11:26:54.000000 114 constraint_builder_2d.cc:292] Score histogram:
                            [cartographer_node-3] Count: 4 Min: 0.664706 Max: 0.9 Mean: 0.749173
                            [cartographer_node-3] [0.664706, 0.688235) ##### Count: 1 (25%) Total: 1 (25%)
                            [cartographer_node-3] [0.688235, 0.711765) ##### Count: 1 (25%) Total: 2 (50%)
                            [cartographer_node-3] [0.711765, 0.735294) ##### Count: 1 (25%) Total: 3 (75%)
                            [cartographer_node-3] [0.735294, 0.758824) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.758824, 0.782353) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.782353, 0.805882) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.805882, 0.829412) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.829412, 0.852941) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.852941, 0.876471) Count: 0 (0%) Total: 3 (75%)
                            [cartographer_node-3] [0.876471, 0.900000] ##### Count: 1 (25%) Total: 4 (100%)
                            Optimizing: Done.
                            Optimizing: Done.
                            [ydlidar_node-6] [YDLIDAR ERROR]: -1 Device is not open
                            [ydlidar_node-6] [ERROR] [1735903615.059047626] [ydlidar_node]: Failed to get scan

                            小鱼小 2 条回复 最后回复 回复 引用 0
                            • S
                              sunhao2202 年度VIP @jerry_88965294
                              最后由 编辑

                              @jerry_88965294 我这也是这个问题，后面都是这样的报错，建图一直跳

                              1 条回复 最后回复 回复 引用 0
                              • 小鱼小
                                小鱼 技术大佬 @sunhao2202
                                最后由 编辑

                                @sunhao2202 您好，使用的是哪个版本的固件，网络质量如何

                                新书配套视频：https://www.bilibili.com/video/BV1GW42197Ck/

                                1 条回复 最后回复 回复 引用 0
                                • 小鱼小
                                  小鱼 技术大佬 @sunhao2202
                                  最后由 编辑

                                  @sunhao2202 在 [FishBot教程] 9.0.6. 雷达驱动及建图测试 中说：

                                  [ydlidar_node-2] [YDLIDAR ERROR]: -1 No error
                                  [ydlidar_node-2] [ERROR] [1735903928.417755598] [ydlidar_node]: Failed to get scan
                                  [ydlidar_node-2] [2025-01-03 11:32:08][error] Timeout count: 1
                                  [ydlidar_node-2] [2025-01-03 11:32:08][error] Check Sum 0x121C != 0x0233
                                  [ydlidar_node-2] [2025-01-03 11:32:34][error] Check Sum 0xB856 != 0x868F
                                  [ydlidar_node-2] [2025-01-03 11:32:34][error] Check Sum 0xBF44 != 0xD5E3
                                  [ydlidar_node-2] [2025-01-03 11:32:35][error] Check Sum 0x53E4 != 0x51BD
                                  [ydlidar_node-2] [2025-01-03 11:32:36][error] Check Sum 0xD974 != 0x87D3
                                  [ydlidar_node-2] [2025-01-03 11:32:50][error] Check Sum 0x1E40 != 0x0FDE
                                  [ydlidar_node-2] [YDLIDAR ERROR]: -1 Operation timed out
                                  [ydlidar_node-2] [ERROR] [1735903972.437430773] [ydlidar_node]: Failed to get scan
                                  [ydlidar_node-2] [2025-01-03 11:32:52][error] Timeout count: 1
                                  [ydlidar_node-2] [YDLIDAR ERROR]: -1 Operation timed out
                                  [ydlidar_node-2] [ERROR] [1735903973.437858047] [ydlidar_node]: Failed to get scan
                                  [ydlidar_node-2] [2025-01-03 11:32:53][error] Timeout count: 2
                                  [ydlidar_node-2] [2025-01-03 11:32:53][error] Check Sum 0x1A71 != 0x15AB
                                  ^C[WARNING] [launch]: user interrupted with ctrl-c (SIGINT)
                                  [ydlidar_node-2] [INFO] [1735903974.800384796] [rclcpp]: signal_handler(signum=2)
                                  [ERROR] [tcp_server-1]: process has died [pid 59, exit code -2, cmd '/workspace/install/ros_serail2wifi/lib/ros_serail2wifi/tcp_server --ros-args --params-file /tmp/launch_params_s0dvbmtk --params-file /tmp/launch_params_4auj8l85'].
                                  [tcp_server-1] Traceback (most recent call last):
                                  [tcp_server-1] File "/workspace/install/ros_serail2wifi/lib/ros_serail2wifi/tcp_server", line 33, in <module>
                                  [tcp_server-1] sys.exit(load_entry_point('ros-serail2wifi==0.0.0', 'console_scripts', 'tcp_server')())
                                  [tcp_server-1] File "/workspace/install/ros_serail2wifi/lib/python3.10/site-packages/ros_serail2wifi/tcpserver.py", line 76, in main
                                  [tcp_server-1] node.run()

                                  驱动正常后再尝试建图

                                  新书配套视频：https://www.bilibili.com/video/BV1GW42197Ck/

                                  S Y 2 条回复 最后回复 回复 引用 0
                                  • S
                                    sunhao2202 年度VIP @小鱼
                                    最后由 编辑

                                    @小鱼 烧录最新固件，我再试试

                                    1 条回复 最后回复 回复 引用 0
                                    • Y
                                      yongyong @小鱼
                                      最后由 编辑

                                      此回复已被删除！
                                      小鱼小 1 条回复 最后回复 回复 引用 0
                                      • Y
                                        yongyong @1216898523
                                        最后由 编辑

                                        此回复已被删除！
                                        1 条回复 最后回复 回复 引用 0
                                        • 小鱼小
                                          小鱼 技术大佬 @yongyong
                                          最后由 编辑

                                          @yongyong 把代理删掉

                                          新书配套视频：https://www.bilibili.com/video/BV1GW42197Ck/

                                          1 条回复 最后回复 回复 引用 0
                                          • 1
                                            1270164455
                                            最后由 编辑

                                            大佬，启动建图的时候打不开rviz是怎么回事：
                                            [cartographer_node-3] [INFO] [1736613946.687195477] [cartographer logger]: I0111 16:45:46.000000 63 map_builder_bridge.cpp:136] Added trajectory with ID '0'.
                                            [ERROR] [rviz2-5]: process has died [pid 67, exit code -6, cmd '/opt/ros/humble/lib/rviz2/rviz2 -d /workspace/launch/config/map.rviz --ros-args -r __node:=rviz2 --params-file /tmp/launch_params_xs5a5ggo'].
                                            [tcp_server-1] [INFO] [1736613946.745584663] [tcp_socket_server_node]: TCP端口:8888，已映射到串口设备:/tmp/tty_laser

                                            1 小鱼小 2 条回复 最后回复 回复 引用 0
                                            • 第一个帖子
                                              最后一个帖子
                                            皖ICP备16016415号-7
                                            Powered by NodeBB | 鱼香ROS