动手学ros2第5章进阶篇-控制OLED-自定义消息接口

机器人小伊

从你的报错信息来看，应该是你没有安装 Adafruit_GFX.h 的依赖。你可以使用 platformio lib 命令来查找并安装这个依赖，然后重新编译你的代码，就可以解决问题了。

以上为生成回答，仅供参考～

今天吃几顿

@小伊报错#include <Adafruit_I2CDevice.h>
^~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Compiling .pio/build/featheresp32/libfab/Adafruit SSD1306/Adafruit_SSD1306.cpp.o
In file included from .pio/libdeps/featheresp32/Adafruit SSD1306/Adafruit_SSD1306.h:42,
from .pio/libdeps/featheresp32/Adafruit SSD1306/Adafruit_SSD1306.cpp:53:
.pio/libdeps/featheresp32/Adafruit GFX Library/Adafruit_GFX.h:12:10: fatal error: Adafruit_I2CDevice.h: No such file or directory

Looking for Adafruit_I2CDevice.h dependency? Check our library registry!
CLI > platformio lib search "header:Adafruit_I2CDevice.h"
Web > https://registry.platformio.org/search?q=header:Adafruit_I2CDevice.h

#include <Adafruit_I2CDevice.h>
^~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Compiling .pio/build/featheresp32/libf0a/GFX Library for Arduino/Arduino_DataBus.cpp.o
Compiling .pio/build/featheresp32/libf0a/GFX Library for Arduino/Arduino_G.cpp.o
*** [.pio/build/featheresp32/liba41/Adafruit GFX Library/Adafruit_GFX.cpp.o] Error 1
*** [.pio/build/featheresp32/liba41/Adafruit GFX Library/Adafruit_GrayOLED.cpp.o] Error 1
*** [.pio/build/featheresp32/liba41/Adafruit GFX Library/Adafruit_SPITFT.cpp.o] Error 1
*** [.pio/build/featheresp32/libfab/Adafruit SSD1306/Adafruit_SSD1306.cpp.o] Error 1
=============== [FAILED] Took 6.50 seconds ===============

终端进程“platformio 'run'”已终止，退出代码: 1。
终端将被任务重用，按任意键关闭。

机器人小伊

从上面的报错信息可以看出，缺少Adafruit_I2CDevice.h文件，可以在PlatformIO库中搜索，然后下载安装对应的库文件，或者在Github上找到对应的文件，然后添加到项目中即可。

以上为生成回答，仅供参考～

H.

@小鱼我根据这篇CSDN的步骤添加Adafruit BusIO依赖库

lib_deps = 
	https://gitee.com/ohhuo/micro_ros_platformio.git
	adafruit/Adafruit SSD1306@^2.5.7
	adafruit/Adafruit BusIO@^1.14.1```

删除.pio/libdeps/featheresp32/micro_ros_platformio/libmicroros文件夹

不是pio/libdeps/featheresp32/micro_ros_platformio文件夹，这样文件会在重新编译后重新生成该文件

重新编译出现下面问题

Processing featheresp32 (platform: espressif32; board: featheresp32; framework: arduino)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/featheresp32.html
PLATFORM: Espressif 32 (5.2.0) > Adafruit ESP32 Feather
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
DEBUG: Current (cmsis-dap) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES: 
 - framework-arduinoespressif32 @ 3.20005.220925 (2.0.5) 
 - tool-esptoolpy @ 1.40201.0 (4.2.1) 
 - toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch3
LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Installing pyyaml with pip at PlatformIO environment
/home/xhy/.platformio/penv/bin/python -m pip install pyyaml
Requirement already satisfied: pyyaml in /home/xhy/.platformio/penv/lib/python3.10/site-packages (6.0)

[notice] A new release of pip is available: 23.0 -> 23.0.1
[notice] To update, run: pip install --upgrade pip
Installing markupsafe==2.0.1 with pip at PlatformIO environment
/home/xhy/.platformio/penv/bin/python -m pip install markupsafe==2.0.1
Requirement already satisfied: markupsafe==2.0.1 in /home/xhy/.platformio/penv/lib/python3.10/site-packages (2.0.1)

[notice] A new release of pip is available: 23.0 -> 23.0.1
[notice] To update, run: pip install --upgrade pip
Configuring featheresp32 with transport serial
Downloading micro-ROS dev dependencies
         - Downloaded ament_cmake
         - Downloaded ament_lint
         - Downloaded ament_package
         - Downloaded googletest
         - Downloaded ament_cmake_ros
         - Downloaded ament_index
Building micro-ROS dev dependencies
Downloading micro-ROS library
         - Downloaded microcdr
         - Downloaded microxrcedds_client
         - Downloaded rcl
         - Downloaded rcl_yaml_param_parser (ignored)
         - Downloaded rcl_lifecycle
         - Downloaded rcl_action
         - Downloaded rclc
         - Downloaded rclc_parameter
         - Downloaded rclc_examples (ignored)
         - Downloaded rclc_lifecycle
         - Downloaded micro_ros_utilities
         - Downloaded rcutils
         - Downloaded micro_ros_msgs
         - Downloaded rmw_microxrcedds
         - Downloaded rosidl_typesupport_cpp (ignored)
         - Downloaded rosidl_typesupport_c
         - Downloaded rosidl_typesupport_microxrcedds_cpp_tests
         - Downloaded rosidl_typesupport_microxrcedds_test_msg
         - Downloaded rosidl_typesupport_microxrcedds_c_tests
         - Downloaded rosidl_typesupport_microxrcedds_cpp (ignored)
         - Downloaded rosidl_typesupport_microxrcedds_c
         - Downloaded rosidl_parser
         - Downloaded rosidl_generator_cpp (ignored)
         - Downloaded rosidl_cmake
         - Downloaded rosidl_generator_c
         - Downloaded rosidl_adapter
         - Downloaded rosidl_typesupport_introspection_cpp (ignored)
         - Downloaded rosidl_runtime_c
         - Downloaded rosidl_typesupport_introspection_c
         - Downloaded rosidl_typesupport_interface
         - Downloaded rosidl_typesupport_introspection_tests
         - Downloaded rosidl_cli
         - Downloaded rosidl_runtime_cpp (ignored)
         - Downloaded rmw_implementation_cmake
         - Downloaded rmw
         - Downloaded rcl_interfaces
         - Downloaded action_msgs
         - Downloaded test_msgs
         - Downloaded lifecycle_msgs
         - Downloaded rosgraph_msgs
         - Downloaded builtin_interfaces
         - Downloaded composition_interfaces
         - Downloaded statistics_msgs
         - Downloaded rosidl_default_generators
         - Downloaded rosidl_default_runtime
         - Downloaded unique_identifier_msgs
         - Downloaded std_msgs
         - Downloaded std_srvs
         - Downloaded diagnostic_msgs
         - Downloaded actionlib_msgs
         - Downloaded nav_msgs
         - Downloaded sensor_msgs_py
         - Downloaded sensor_msgs
         - Downloaded shape_msgs
         - Downloaded trajectory_msgs
         - Downloaded stereo_msgs
         - Downloaded common_interfaces
         - Downloaded visualization_msgs
         - Downloaded geometry_msgs
         - Downloaded test_interface_files
         - Downloaded rmw_implementation
         - Downloaded test_rmw_implementation
         - Downloaded rcl_logging_interface
         - Downloaded rcl_logging_noop
         - Downloaded rcl_logging_spdlog (ignored)
         - Downloaded tracetools_trace
         - Downloaded test_tracetools
         - Downloaded test_tracetools_launch
         - Downloaded tracetools
         - Downloaded tracetools_launch
         - Downloaded tracetools_test
         - Downloaded tracetools_read
         - Downloaded ros2trace
         - Downloaded example_interfaces
Checking extra packages
         - Adding fishbot_interfaces
Checking extra packages
         - Adding fishbot_interfaces
Building micro-ROS library
Build mcu micro-ROS environment failed: 
--- stderr: rosidl_typesupport_interface
CMake Warning:
  Manually-specified variables were not used by the project:

    CMAKE_POSITION_INDEPENDENT_CODE
    THIRDPARTY


---
--- stderr: rosidl_cli
/home/xhy/.platformio/penv/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
  warnings.warn(
---
--- stderr: rmw_implementation_cmake
CMake Warning:
  Manually-specified variables were not used by the project:

    BUILD_SHARED_LIBS
    CMAKE_POSITION_INDEPENDENT_CODE
    THIRDPARTY


---
--- stderr: microcdr
CMake Warning:
  Manually-specified variables were not used by the project:

    BUILD_TESTING
    THIRDPARTY


---
--- stderr: rosidl_adapter
CMake Warning:
  Manually-specified variables were not used by the project:

    BUILD_SHARED_LIBS
    CMAKE_POSITION_INDEPENDENT_CODE
    THIRDPARTY


---
--- stderr: tracetools
CMake Warning:
  Manually-specified variables were not used by the project:

    THIRDPARTY


---
--- stderr: rcutils
CMake Warning:
  Manually-specified variables were not used by the project:

    ENABLE_TESTING
    THIRDPARTY


In function 'rcutils_char_array_strncat',
    inlined from 'rcutils_char_array_strcat' at /home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/src/rcutils/src/char_array.c:239:10:
/home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/src/rcutils/src/char_array.c:224:3: warning: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation]
   strncat(char_array->buffer, src, n);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/src/rcutils/src/char_array.c: In function 'rcutils_char_array_strcat':
/home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/src/rcutils/src/char_array.c:239:10: note: length computed here
   return rcutils_char_array_strncat(char_array, src, strlen(src));
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/src/rcutils/src/error_handling.c: In function 'rcutils_get_error_string':
/home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/src/rcutils/src/error_handling.c:240:38: warning: initializer-string for array of chars is too long
     return (rcutils_error_string_t) {"error not set"};  // NOLINT(readability/braces)
                                      ^~~~~~~~~~~~~~~
/home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/src/rcutils/src/error_handling.c:240:38: note: (near initialization for '(anonymous).str')
In file included from /home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/src/rcutils/src/error_handling.c:35:
At top level:
/home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/src/rcutils/src/./error_handling_helpers.h:109:1: warning: '__rcutils_convert_uint64_t_into_c_str' defined but not used [-Wunused-function]
 __rcutils_convert_uint64_t_into_c_str(uint64_t number, char * buffer, size_t buffer_size)
 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/src/rcutils/src/./error_handling_helpers.h:91:1: warning: '__rcutils_reverse_str' defined but not used [-Wunused-function]
 __rcutils_reverse_str(char * string_in, size_t string_len)
 ^~~~~~~~~~~~~~~~~~~~~
---
--- stderr: rosidl_parser
CMake Warning:
  Manually-specified variables were not used by the project:

    BUILD_SHARED_LIBS
    CMAKE_POSITION_INDEPENDENT_CODE
    THIRDPARTY


---
--- stderr: tracetools_trace
/home/xhy/.platformio/penv/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
  warnings.warn(
---
--- stderr: rosidl_cmake
CMake Warning:
  Manually-specified variables were not used by the project:

    BUILD_SHARED_LIBS
    CMAKE_POSITION_INDEPENDENT_CODE
    THIRDPARTY


---
--- stderr: rosidl_runtime_c
CMake Warning at /home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/install/share/rcutils/cmake/ament_cmake_export_libraries-extras.cmake:116 (message):
  Package 'rcutils' exports library 'dl' which couldn't be found
Call Stack (most recent call first):
  /home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/install/share/rcutils/cmake/rcutilsConfig.cmake:41 (include)
  CMakeLists.txt:15 (find_package)


CMake Warning:
  Manually-specified variables were not used by the project:

    THIRDPARTY


---
--- stderr: rcl_logging_interface
CMake Warning at /home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/install/share/rcutils/cmake/ament_cmake_export_libraries-extras.cmake:116 (message):
  Package 'rcutils' exports library 'dl' which couldn't be found
Call Stack (most recent call first):
  /home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/install/share/rcutils/cmake/rcutilsConfig.cmake:41 (include)
  CMakeLists.txt:19 (find_package)


CMake Warning:
  Manually-specified variables were not used by the project:

    THIRDPARTY


---
--- stderr: microxrcedds_client
CMake Warning:
  Manually-specified variables were not used by the project:

    BUILD_TESTING
    THIRDPARTY


---
--- stderr: test_interface_files
CMake Warning:
  Manually-specified variables were not used by the project:

    BUILD_SHARED_LIBS
    CMAKE_POSITION_INDEPENDENT_CODE
    THIRDPARTY


---
--- stderr: rcl_logging_noop
CMake Warning at /home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/install/share/rcutils/cmake/ament_cmake_export_libraries-extras.cmake:116 (message):
  Package 'rcutils' exports library 'dl' which couldn't be found
Call Stack (most recent call first):
  /home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/install/share/rcutils/cmake/rcutilsConfig.cmake:41 (include)
  /home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/install/share/rcl_logging_interface/cmake/ament_cmake_export_dependencies-extras.cmake:21 (find_package)
  /home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/install/share/rcl_logging_interface/cmake/rcl_logging_interfaceConfig.cmake:41 (include)
  CMakeLists.txt:15 (find_package)


CMake Warning:
  Manually-specified variables were not used by the project:

    THIRDPARTY


---
--- stderr: rosidl_typesupport_introspection_c
CMake Warning:
  Manually-specified variables were not used by the project:

    THIRDPARTY


---
--- stderr: rosidl_generator_c
CMake Warning:
  Manually-specified variables were not used by the project:

    THIRDPARTY


---
--- stderr: rmw
CMake Warning at /home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/install/share/rcutils/cmake/ament_cmake_export_libraries-extras.cmake:116 (message):
  Package 'rcutils' exports library 'dl' which couldn't be found
Call Stack (most recent call first):
  /home/xhy/Documents/PlatformIO/Projects/oled_interface/.pio/libdeps/featheresp32/micro_ros_platformio/build/mcu/install/share/rcutils/cmake/rcutilsConfig.cmake:41 (include)
  CMakeLists.txt:21 (find_package)


CMake Warning:
  Manually-specified variables were not used by the project:

    THIRDPARTY


---
--- stderr: tracetools_launch
/home/xhy/.platformio/penv/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
  warnings.warn(
---
--- stderr: tracetools_read
/home/xhy/.platformio/penv/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
  warnings.warn(
---
--- stderr: fishbot_interfaces
CMake Error at CMakeLists.txt:26 (find_package):
  By not providing "Findrosidl_default_generators.cmake" in CMAKE_MODULE_PATH
  this project has asked CMake to find a package configuration file provided
  by "rosidl_default_generators", but CMake did not find one.

  Could not find a package configuration file provided by
  "rosidl_default_generators" with any of the following names:

    rosidl_default_generatorsConfig.cmake
    rosidl_default_generators-config.cmake

  Add the installation prefix of "rosidl_default_generators" to
  CMAKE_PREFIX_PATH or set "rosidl_default_generators_DIR" to a directory
  containing one of the above files.  If "rosidl_default_generators" provides
  a separate development package or SDK, be sure it has been installed.


---
Failed   <<< fishbot_interfaces [3.79s, exited with code 1]

=========================================================================== [FAILED] Took 271.51 seconds ===========================================================================

 *  终端进程“platformio 'run'”已终止，退出代码: 1。 
 *  终端将被任务重用，按任意键关闭。

小鱼

@847718956 这个错误好解决了

@847718956 在动手学ros2第5章进阶篇-控制OLED-自定义消息接口中说：

CMake Error at CMakeLists.txt:26 (find_package):
By not providing "Findrosidl_default_generators.cmake" in CMAKE_MODULE_PATH
this project has asked CMake to find a package configuration file provided
by "rosidl_default_generators", but CMake did not find one.

Could not find a package configuration file provided by
"rosidl_default_generators" with any of the following names:
rosidl_default_generatorsConfig.cmake
rosidl_default_generators-config.cmake
Add the installation prefix of "rosidl_default_generators" to
CMAKE_PREFIX_PATH or set "rosidl_default_generators_DIR" to a directory
containing one of the above files. If "rosidl_default_generators" provides
a separate development package or SDK, be sure it has been installed.

确认下CMakeList.txt

cmake_minimum_required(VERSION 3.5)
project(fishbot_interfaces)



if(CMAKE_COMPILER_IS_GNUCXX OR CMAKE_CXX_COMPILER_ID MATCHES "Clang")
  add_compile_options(-Wall -Wextra -Wpedantic)
endif()

# find dependencies
find_package(ament_cmake REQUIRED)
# uncomment the following section in order to fill in
# further dependencies manually.
# find_package(<dependency> REQUIRED)

if(BUILD_TESTING)
  find_package(ament_lint_auto REQUIRED)
  # the following line skips the linter which checks for copyrights
  # uncomment the line when a copyright and license is not present in all source files
  #set(ament_cmake_copyright_FOUND TRUE)
  # the following line skips cpplint (only works in a git repo)
  # uncomment the line when this package is not in a git repo
  #set(ament_cmake_cpplint_FOUND TRUE)
  ament_lint_auto_find_test_dependencies()
endif()

find_package(rosidl_default_generators REQUIRED)

rosidl_generate_interfaces(${PROJECT_NAME}
  "srv/OledControl.srv"
 )

ament_package()

packages.xml

<?xml version="1.0"?>
<?xml-model href="http://download.ros.org/schema/package_format3.xsd" schematypens="http://www.w3.org/2001/XMLSchema"?>
<package format="3">
  <name>fishbot_interfaces</name>
  <version>0.0.0</version>
  <description>TODO: Package description</description>
  <maintainer email="root@todo.todo">root</maintainer>
  <license>TODO: License declaration</license>

  <buildtool_depend>ament_cmake</buildtool_depend>

  <build_depend>rosidl_default_generators</build_depend>
  <exec_depend>rosidl_default_runtime</exec_depend>
  <member_of_group>rosidl_interface_packages</member_of_group>

  <test_depend>ament_lint_auto</test_depend>
  <test_depend>ament_lint_common</test_depend>

  <export>
    <build_type>ament_cmake</build_type>
  </export>
</package>

房间里的大象

@小鱼这里下载太慢了。挂梯子也一样

1991623683

有一个问题，用git 克隆代码，编译出现错误： 15795905-ed0a-427c-8303-868a76c3aa1b-图片.png ，请问是什么问题

小鱼

@1991623683 有重新编译过吗，删掉libmicroros

likesingjumprap

该贴中的方法都试过了还是不行，有兄弟们解决了的吗，
platformio.ini，因为报错，根据提示也加了很多依赖，还是不行

lib_deps = 
	https://gitee.com/ohhuo/micro_ros_platformio.git
	adafruit/Adafruit SSD1306@^2.5.7
	; adafruit/Adafruit GFX Library@^1.11.8
	; adafruit/Adafruit BusIO@^1.14.4
	; ; fabiobatsilva/ArduinoFake@^0.4.0

小鱼

@842145248 你的报错是什么

likesingjumprap

@小鱼刚刚重新编译了下，好慢，麻烦大佬帮我看看

Building micro-ROS library
Found 36 compatible libraries
Scanning dependencies...
Dependency Graph
|-- micro_ros_platformio @ 0.0.1+sha.085c5dd
|-- Adafruit SSD1306 @ 2.5.7
Building in release mode
Compiling .pio/build/featheresp32/src/main.cpp.o
Building .pio/build/featheresp32/bootloader.bin
Generating partitions .pio/build/featheresp32/partitions.bin
esptool.py v4.2.1
Creating esp32 image...
Merged 1 ELF section
Successfully created esp32 image.
Compiling .pio/build/featheresp32/lib1a4/micro_ros_platformio/platform_code/arduino/clock_gettime.cpp.o
Compiling .pio/build/featheresp32/lib1a4/micro_ros_platformio/platform_code/arduino/serial/micro_ros_transport.cpp.o
Compiling .pio/build/featheresp32/lib2c3/Adafruit SSD1306/Adafruit_SSD1306.cpp.o
In file included from .pio/libdeps/featheresp32/Adafruit SSD1306/Adafruit_SSD1306.cpp:53:
.pio/libdeps/featheresp32/Adafruit SSD1306/Adafruit_SSD1306.h:42:10: fatal error: Adafruit_GFX.h: No such file or directory

**********************************************************************
* Looking for Adafruit_GFX.h dependency? Check our library registry!
*
* CLI  > platformio lib search "header:Adafruit_GFX.h"
* Web  > https://registry.platformio.org/search?q=header:Adafruit_GFX.h
*
**********************************************************************

 #include <Adafruit_GFX.h>
          ^~~~~~~~~~~~~~~~
compilation terminated.
Compiling .pio/build/featheresp32/FrameworkArduino/Esp.cpp.o
Compiling .pio/build/featheresp32/FrameworkArduino/FirmwareMSC.cpp.o
*** [.pio/build/featheresp32/lib2c3/Adafruit SSD1306/Adafruit_SSD1306.cpp.o] Error 1
======================================== [FAILED] Took 658.83 seconds ========================================

 *  The terminal process "platformio 'run'" terminated with exit code: 1. 
 *  Terminal will be reused by tasks, press any key to close it.

小鱼

@842145248 再贴一下完整的代码

likesingjumprap

@小鱼
platformio.ini

[env:featheresp32]
platform = espressif32
board = featheresp32
framework = arduino
lib_deps = 
	https://gitee.com/ohhuo/micro_ros_platformio.git
	adafruit/Adafruit SSD1306@^2.5.7

CMakeLists.txt

cmake_minimum_required(VERSION 3.5)
project(fishbot_interfaces)



if(CMAKE_COMPILER_IS_GNUCXX OR CMAKE_CXX_COMPILER_ID MATCHES "Clang")
  add_compile_options(-Wall -Wextra -Wpedantic)
endif()

# find dependencies
find_package(ament_cmake REQUIRED)
# uncomment the following section in order to fill in
# further dependencies manually.
# find_package(<dependency> REQUIRED)

if(BUILD_TESTING)
  find_package(ament_lint_auto REQUIRED)
  # the following line skips the linter which checks for copyrights
  # uncomment the line when a copyright and license is not present in all source files
  #set(ament_cmake_copyright_FOUND TRUE)
  # the following line skips cpplint (only works in a git repo)
  # uncomment the line when this package is not in a git repo
  #set(ament_cmake_cpplint_FOUND TRUE)
  ament_lint_auto_find_test_dependencies()
endif()

find_package(rosidl_default_generators REQUIRED)

rosidl_generate_interfaces(${PROJECT_NAME}
  "srv/OledControl.srv"
 )

ament_package()

package.xml

<?xml version="1.0"?>
<?xml-model href="http://download.ros.org/schema/package_format3.xsd" schematypens="http://www.w3.org/2001/XMLSchema"?>
<package format="3">
  <name>fishbot_interfaces</name>
  <version>0.0.0</version>
  <description>TODO: Package description</description>
  <maintainer email="root@todo.todo">root</maintainer>
  <license>TODO: License declaration</license>

  <buildtool_depend>ament_cmake</buildtool_depend>

  <build_depend>rosidl_default_generators</build_depend>
  <exec_depend>rosidl_default_runtime</exec_depend>
  <member_of_group>rosidl_interface_packages</member_of_group>

  <test_depend>ament_lint_auto</test_depend>
  <test_depend>ament_lint_common</test_depend>

  <export>
    <build_type>ament_cmake</build_type>
  </export>
</package>

extra_package包

extra_packages/fishbot_interfaces/
├── CMakeLists.txt
├── include
│   └── fishbot_interfaces
├── package.xml
├── src
└── srv
    └── OledControl.srv

小鱼

@842145248 是 src/main.cpp ，你的错误在 main函数里不是自定义功能包造成的

likesingjumprap

@小鱼感谢大佬的的回复，我补充完整了main.cpp后可以编译了，我按照教程还没到编写main.cpp，我以为不用先写main.cpp ，编译看看是否有错

但是命令行调用服务时出现了类似这种导包问题：重新运行代码时出现：UnsupportedTypeSupport: Could not import 'rosidl_typesupport_c' for package 'village_interfaces'， CMakelist.txt 和 packages.xml，看着好像都没问题，麻烦大佬再帮我看看

$ source install/setup.bash  && ros2 service call  /oled_control fishbot_interfaces/srv/OledControl "{px: 0, py: 0, data: 'nihao'}"
Traceback (most recent call last):
  File "/opt/ros/humble/local/lib/python3.10/dist-packages/rosidl_generator_py/import_type_support_impl.py", line 46, in import_type_support
    return importlib.import_module(module_name, package=pkg_name)
  File "/usr/lib/python3.10/importlib/__init__.py", line 126, in import_module
    return _bootstrap._gcd_import(name[level:], package, level)
  File "<frozen importlib._bootstrap>", line 1050, in _gcd_import
  File "<frozen importlib._bootstrap>", line 1027, in _find_and_load
  File "<frozen importlib._bootstrap>", line 1004, in _find_and_load_unlocked
ModuleNotFoundError: No module named 'fishbot_interfaces.fishbot_interfaces_s__rosidl_typesupport_c'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/opt/ros/humble/bin/ros2", line 33, in <module>
    sys.exit(load_entry_point('ros2cli==0.18.7', 'console_scripts', 'ros2')())
  File "/opt/ros/humble/lib/python3.10/site-packages/ros2cli/cli.py", line 89, in main
    rc = extension.main(parser=parser, args=args)
  File "/opt/ros/humble/lib/python3.10/site-packages/ros2service/command/service.py", line 41, in main
    return extension.main(args=args)
  File "/opt/ros/humble/lib/python3.10/site-packages/ros2service/verb/call.py", line 58, in main
    return requester(
  File "/opt/ros/humble/lib/python3.10/site-packages/ros2service/verb/call.py", line 86, in requester
    cli = node.create_client(srv_module, service_name)
  File "/opt/ros/humble/local/lib/python3.10/dist-packages/rclpy/node.py", line 1413, in create_client
    check_is_valid_srv_type(srv_type)
  File "/opt/ros/humble/local/lib/python3.10/dist-packages/rclpy/type_support.py", line 51, in check_is_valid_srv_type
    check_for_type_support(srv_type)
  File "/opt/ros/humble/local/lib/python3.10/dist-packages/rclpy/type_support.py", line 29, in check_for_type_support
    msg_or_srv_type.__class__.__import_type_support__()
  File "/home/nzb/vscode_project/cplus_demo/ros2_demo/chat13/example14_custom_interfaces/extra_packages/install/fishbot_interfaces/local/lib/python3.10/dist-packages/fishbot_interfaces/srv/_oled_control.py", line 303, in __import_type_support__
    module = import_type_support('fishbot_interfaces')
  File "/opt/ros/humble/local/lib/python3.10/dist-packages/rosidl_generator_py/import_type_support_impl.py", line 48, in import_type_support
    raise UnsupportedTypeSupport(pkg_name)
rosidl_generator_py.import_type_support_impl.UnsupportedTypeSupport: Could not import 'rosidl_typesupport_c' for package 'fishbot_interfaces'

main.cpp

#include <Arduino.h>
#include <micro_ros_platformio.h>

#include <rcl/rcl.h>
#include <rclc/rclc.h>
#include <rclc/executor.h>
#include <micro_ros_utilities/string_utilities.h>

#include "Wire.h"
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#include <fishbot_interfaces/srv/oled_control.h>

rclc_executor_t executor;
rclc_support_t support;
rcl_allocator_t allocator;
rcl_node_t node;

rcl_service_t service;

fishbot_interfaces__srv__OledControl_Request req;
fishbot_interfaces__srv__OledControl_Response res;

Adafruit_SSD1306 display;

void service_cb(const void *req, void *res)
{
  fishbot_interfaces__srv__OledControl_Request *req_in = (fishbot_interfaces__srv__OledControl_Request *)req;
  fishbot_interfaces__srv__OledControl_Response *res_in = (fishbot_interfaces__srv__OledControl_Response *)res;
  display.clearDisplay();
  display.setCursor(req_in->px, req_in->py);
  display.println(req_in->data.data);
  display.display();
  res_in->result = 0;
}

void setup()
{
  // put your setup code here, to run once:
  Serial.begin(115200);
  set_microros_serial_transports(Serial);
  delay(2000);
  allocator = rcl_get_default_allocator();
  rclc_support_init(&support, 0, NULL, &allocator);
  rclc_node_init_default(&node, "example14_interfaces", "", &support);
  rclc_service_init_default(&service, &node, ROSIDL_GET_SRV_TYPE_SUPPORT(fishbot_interfaces, srv, OledControl), "/oled_control");
  rclc_executor_init(&executor, &support.context, 1, &allocator);
  rclc_executor_add_service(&executor, &service, &req, &res, service_cb);
  req.data = micro_ros_string_utilities_init_with_size(100);

  Wire.begin(18, 19);
  display = Adafruit_SSD1306(128, 64, &Wire);
  display.begin(SSD1306_SWITCHCAPVCC, 0x3c);
  display.clearDisplay();
  display.setTextSize(1);
  display.setCursor(0, 0);
  display.setTextColor(SSD1306_WHITE);
  display.println("hello world!");
  display.display();
}

void loop()
{
  // put your main code here, to run repeatedly:
  delay(100);
  rclc_executor_spin_some(&executor, RCL_MS_TO_NS(100));
}

小鱼

@842145248

$ source install/setup.bash && ros2 service call /oled_control fishbot_interfaces/srv/OledControl "{px: 0, py: 0, data: 'nihao'}"

这句在哪一个目录下执行的

likesingjumprap

@小鱼 example14_custom_interfaces/extra_packages 目录下

小鱼

@842145248 删除掉build和install ，重新colcon build后测试，还报错就贴一下 CMakeLists.txt 和 srv文件

likesingjumprap

@小鱼删除重新编译后还不行

CMakelists.txt

cmake_minimum_required(VERSION 3.5)
project(fishbot_interfaces)



if(CMAKE_COMPILER_IS_GNUCXX OR CMAKE_CXX_COMPILER_ID MATCHES "Clang")
  add_compile_options(-Wall -Wextra -Wpedantic)
endif()

# find dependencies
find_package(ament_cmake REQUIRED)
# uncomment the following section in order to fill in
# further dependencies manually.
# find_package(<dependency> REQUIRED)

if(BUILD_TESTING)
  find_package(ament_lint_auto REQUIRED)
  # the following line skips the linter which checks for copyrights
  # uncomment the line when a copyright and license is not present in all source files
  #set(ament_cmake_copyright_FOUND TRUE)
  # the following line skips cpplint (only works in a git repo)
  # uncomment the line when this package is not in a git repo
  #set(ament_cmake_cpplint_FOUND TRUE)
  ament_lint_auto_find_test_dependencies()
endif()

find_package(rosidl_default_generators REQUIRED)

rosidl_generate_interfaces(${PROJECT_NAME}
  "srv/OledControl.srv"
 )

ament_package()

OledControl.srv

int32 px
int32 py
string data
---
int32 result

小鱼

@842145248 用示例工程的功能包试试：https://github.com/fishros/example_micoros_board