[FishBot教程]9.0.7. FishBot-Nav2导航测试
-
@小鱼
可以看到数据 -
@2940867840 贴上launch文件单独发个帖子吧，不要截图
-
在colcon build的时候 bringup功能包报错是因为什么啊？ -
运行bringup功能包的时候报错 joint_state_publisher不存在怎么解决啊 -
@1141682555 在 [FishBot教程]7. FishBot-Nav2导航测试 中说：
运行bringup功能包的时候报错 joint_state_publisher不存在怎么解决啊@小伊 ros2 humble 下出现的问题，用apt怎么安装
-
sudo apt install ros-humble-joint-state-publisher
以上为生成回答，仅供参考～
-
在做nav2导航测试，为什么有个标识车辆位置的点在图外。左下角的位置。是否中间什么点错了？
目前目标位置，车子可以正常过去。
有时发现车子检测的位置和地图不匹配，有方向偏移或位置偏移，这个如何矫正。
发现的其他问题1：
过一段时间雷达会超时（时间不固定ctr+C，退出，重新选1驱动雷达。数据会正常。l
发现的其他问题2：
rviz2中雷达数据和小车状态不更新，提示queue is full
处理方式：关闭rviz2,重新启动程序ros2 launch fishbot_navigation2 navigation2.launch.py
file:///home/mengl/%E5%9B%BE%E7%89%87/%E6%88%AA%E5%9B%BE/%E6%88%AA%E5%9B%BE%202024-06-28%2010-40-07.png -
@15724948 在 [FishBot教程]7. FishBot-Nav2导航测试 中说：
为什么有个标识车辆位置的点在图外。左下角的位置。是否中间什么点错了
左下角是odom转换正常，雷达这边考虑网络问题
-
@小鱼 在 [FishBot教程]7. FishBot-Nav2导航测试 中说：
@小鱼 在 [FishBot教程]7. FishBot-Nav2导航测试 中说：
rosdep install --from-paths src --ignore-src -y -r # 安装依赖
这一步，先跑一次一键安装
-
@小鱼
安装过了，最后还是这样。 -
此回复已被删除！ -
@lzw 下次最好单独提问，不然容易看不到帖子。
这个问题之前应该出现过，提示缺少的那个包装一下就好（最好复制粘贴错误，我也好复制粘贴给你命令）
@小鱼 在 [FishBot教程]7. FishBot-Nav2导航测试 中说：
1.请使用ubuntu22.04 系统 2.请安装 joint_state_publisher
就是这里
sudo apt install ros-humble-joint-state-publisher
-
跟着文字做到第五步导航测试时输入命令出现以下错误：
版本为22.04
[INFO] [launch]: All log files can be found below /home/lzw/.ros/log/2024-08-02-19-20-35-132678-lzw-6309
[INFO] [launch]: Default logging verbosity is set to INFO
[ERROR] [launch]: Caught exception in launch (see debug for traceback): Caught multiple exceptions when trying to load file of format [py]:- IndentationError: expected an indented block after function definition on line 20 (navigation2.launch.py, line 21)
- InvalidFrontendLaunchFileError: The launch file may have a syntax error, or its format is unknown
-
@lzw 工作空间不对，你的目录在主目录了，应该到工作空间下执行
-
我在拉取项目，也就是文中第二个命令时，出现了下面的错误：正克隆到 'fishbot'...
remote: Enumerating objects: 84, done.
remote: Counting objects: 100% (84/84), done.
remote: Compressing objects: 100% (69/69), done.
remote: Total 84 (delta 21), reused 46 (delta 7), pack-reused 0 (from 0)
接收对象中: 100% (84/84), 332.98 KiB | 1.06 MiB/s, 完成.
处理 delta 中: 100% (21/21), 完成.
子模组 'src/cartographer_code/cartographer'（https://github.91chi.fun/https://github.com/ros2/cartographer.git）已对路径 'src/cartographer_code/cartographer' 注册
子模组 'src/cartographer_code/cartographer_ros'（https://github.91chi.fun/https://github.com/ros2/cartographer_ros.git）已对路径 'src/cartographer_code/cartographer_ros' 注册
子模组 'src/navigation'（https://github.91chi.fun/https://github.com/fishros/navigation2.git）已对路径 'src/navigation' 注册
正克隆到 '/home/zdd/fishbot/src/cartographer_code/cartographer'...
fatal: 无法访问 'https://github.91chi.fun/https://github.com/ros2/cartographer.git/'：gnutls_handshake() failed: Error in the pull function.
fatal: 无法克隆 'https://github.91chi.fun/https://github.com/ros2/cartographer.git' 到子模组路径 '/home/zdd/fishbot/src/cartographer_code/cartographer'
克隆 'src/cartographer_code/cartographer' 失败。按计划重试
正克隆到 '/home/zdd/fishbot/src/cartographer_code/cartographer_ros'...希望鱼哥解答一下 -
@2462331351 换个github代理试试
-
@小鱼 换了，发现还是不行，我去我的windows（可以正常Google的）发现还是有错误```
Failed to clone 'src/cartographer_code/cartographer'. Retry scheduled
Cloning into 'C:/Users/ZDD/fishbot/src/cartographer_code/cartographer_ros'...
fatal: unable to access 'https://github.91chi.fun/https://github.com/ros2/cartographer_ros.git/': Recv failure: Connection was reset
fatal: clone of 'https://github.91chi.fun/https://github.com/ros2/cartographer_ros.git' into submodule path 'C:/Users/ZDD/fishbot/src/cartographer_code/cartographer_ros' failed
Failed to clone 'src/cartographer_code/cartographer_ros'. Retry scheduled
Cloning into 'C:/Users/ZDD/fishbot/src/navigation'...
fatal: unable to access 'https://github.91chi.fun/https://github.com/fishros/navigation2.git/': Recv failure: Connection was reset
fatal: clone of 'https://github.91chi.fun/https://github.com/fishros/navigation2.git' into submodule path 'C:/Users/ZDD/fishbot/src/navigation' failed
Failed to clone 'src/navigation'. Retry scheduled
Cloning into 'C:/Users/ZDD/fishbot/src/cartographer_code/cartographer'...
fatal: unable to access 'https://github.91chi.fun/https://github.com/ros2/cartographer.git/': Recv failure: Connection was reset
fatal: clone of 'https://github.91chi.fun/https://github.com/ros2/cartographer.git' into submodule path 'C:/Users/ZDD/fishbot/src/cartographer_code/cartographer' failed
Failed to clone 'src/cartographer_code/cartographer' a second time, aborting -
-
@小鱼 我不太明白，请问
这个代理怎么换呀 -
此回复已被删除！
