[FishBot教程]9.0.7. FishBot-Nav2导航测试
-
现在变成这样了 -
-
@小鱼 可我的E盘有47.3GB可用啊
-
@小鱼 0 upgraded, 82 newly installed, 0 to remove and 177 not upgraded.
Need to get 119 MB of archives.
After this operation, 323 MB of additional disk space will be used.
E: You don't have enough free space in /var/cache/apt/archives/.
ERROR: the following rosdeps failed to install
apt: command [sudo -H apt-get install -y ros-humble-gazebo-ros-pkgs] failed
apt: command [sudo -H apt-get install -y gazebo] failed
apt: command [sudo -H apt-get install -y ros-humble-gazebo-ros] failed
apt: Failed to detect successful installation of [ros-humble-gazebo-ros-pkgs]
apt: Failed to detect successful installation of [gazebo]
apt: Failed to detect successful installation of [ros-humble-gazebo-ros]
colcon: command not found就是这样，显示我地方不够，我腾E盘几个G还是这样
-
@小鱼 0 upgraded, 0 newly installed, 0 to remove and 177 not upgraded.
#All required rosdeps installed successfully
colcon: command not found
现在安装成功了，但是colcon还是不成功 -
-
@小鱼 OSError: [Errno 28] No space left on device: 'log/build_2023-03-11_13-56-33'
鱼哥，编译告诉我空间不够了，有什么好用的办法腾出来？
-
@921203724 最好重新装下系统，分配大点空间
-
此回复已被删除！ -
@小鱼 在 [FishBot教程]7. FishBot-Nav2导航测试 中说：
source install/setup.bash
ros2 launch fishbot_bringup fishbot_bringup.launch.py需要添加
cd fishbot
source install/setup.bash -
此回复已被删除！ -
鱼哥，请问一下第三部启动 bring up 报这个错如何解决？
[ERROR] [launch]: Caught exception in launch (see debug for traceback): "package 'joint_state_publisher' not found, searching: ['/home/tcode9/fishbot/fishbot/install/fishbot_navigation2', '/home/tcode9/fishbot/fishbot/install/fishbot_interfaces', '/home/tcode9/fishbot/fishbot/install/fishbot_description', '/home/tcode9/fishbot/fishbot/install/fishbot_cartographer', '/home/tcode9/fishbot/fishbot/install/fishbot_bringup', '/opt/ros/humble']” -
@小鱼 在 [FishBot教程]7. FishBot-Nav2导航测试 中说：
rosdep install --from-paths src --ignore-src -y -r # 安装依赖
这一步，先跑一次一键安装
-
@小鱼 謝謝,已解決
-
@小鱼 在 [FishBot教程]7. FishBot-Nav2导航测试 中说：
git clone https://github.com/fishros/fishbot.git -b v1.0.0 --depth=1
cd fishbot
rosdep install --from-paths src --ignore-src -y -r # 安装依赖
colcon build -
想要换自己的雷达 需要怎么操作
-
@1250372262 重点在雷达转接板，雷达转接板可以实现串口转wifi转串口功能，配合代码：https://www.fishros.org.cn/forum/topic/949/拓展-雷达转接板的无线串口功能驱动代码
-
@小鱼 我是需要把原来的雷达替换成新雷达 然后把无线串口功能代码烧进板子里面 还是 无线串口功能代码是在电脑使用 直接把雷达换了 这一块不是很理解
-
@1250372262 雷达板原有的固件不用动，配置上面给的代码就可以实现转串口了
-
@小鱼 这个代码是要放在雷达板还是电脑上 我现在雷达是有驱动的 这个驱动能在ros2正常用，我这个雷达如果插到雷达板了 驱动也是不能正常用，要是插在电脑上 那车上还得放个电脑么
